Ariens 915055 - 1944, 915057 - 2148, 915059 - 2352, 915065 - 1540, 915067 - 1740, 915501 - 1844, 915502 - 1540 SERVING BATTERY, NOTE:, Models 915065 and, Remove (Figure 18), Install (Figure 18), Battery Removal and Installation

Models 915065 and 502

1

3

2

1.	Anti-scalp Roller 3.	Highest Position
2.	Lowest Position
	Figure 17	OE0310

SERVING BATTERY

NOTE: Unit comes equipped with a maintenance-free battery that requires no regular maintenance except cleaning the terminals.

WARNING: Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling.

Battery Removal and Installation

Remove (Figure 18)

1.Tip seat forward (see TIPPING SEAT FORWARD on page 17).

2.Disconnect negative (–) cable first, then positive (+) cable.

3.Remove battery hold-down bracket and battery from unit.

Install (Figure 18)

1.Install battery on the unit with battery hold-down bracket.

2.Connect positive (+) cable first, then negative (–) cable.

3.Apply petroleum jelly or dielectric grease to battery cable ends and terminals.

4.Tip seat back (see TIPPING SEAT FORWARD on page 17).

Cleaning Battery and Battery Cables (Figure 18)

1.Tip seat forward (see TIPPING SEAT FORWARD on page 17).

2.Disconnect negative (–) cable first, then positive (+) cable.

3.Clean battery cable ends, negative (–) terminal, and positive (+) terminal with a wire brush and rinse with a weak baking soda solution.

4.Connect positive (+) cable first, then negative (–) cable.

5.Apply petroleum jelly or dielectric grease to battery cable ends and terminals.

6.Tip seat back (see TIPPING SEAT FORWARD on page 17).

1

6

							2
		5
	4
			3
1.	Battery
				3.		Negative (–)
	Hold-Down					Terminal
	Bracket			4.		Battery
2.	Negative (–)			5.		Positive (+)
	Cable					Terminal
				6.		Positive (+)
				Figure 18		cable
							OE0120

GB - 22