Getting Started
Unpacking
Check that you received the following items:
•Audio connecting cord (1)
•Remote commander (remote) (1)
•Sony
Inserting batteries into the remote
Getting Started
Hooking Up the System
Overview
This section describes how to hook up the CD player to an amplifier. Be sure to turn off the power of each component before making the connections.
CD player
You can control the player using the supplied remote. Insert two size AA (R6) batteries by matching the + and – on the batteries. When using the remote, point it at the remote sensor gon the player.
Line output
(R)
Audio input
(L)
Line output
(L)To an AC outlet
Audio input
(R)Amplifier
When to replace batteries
With normal use, the batteries should last for about six months. When the remote no longer operates the player, replace all the batteries with new ones.
Notes
•Do not leave the remote near an extremely hot or humid place.
•Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
•Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.
•If you don’t use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.
: Signal flow | To an AC outlet |
What cords will I need?
Audio cord (supplied) (1)
White | White | |
(L) | (L) | |
Red | Red | |
(R) | ||
(R) | ||
|
Hookups
When connecting an audio cord, be sure to match the
CD player | Amplifier |
LINE OUT | INPUT |
FIXED | CD |
L | L |
R | R |
5
