Sony CDP-CA9ES operating instructions Locating a Specific Track or a Point in a Track

Locating a Specific Track or a Point in a Track

You can quickly locate any track while playing a disc using the -/± (AMS: Automatic Music Sensor) buttons or number buttons. You can also locate a specific point in a track while playing a disc.

Number buttons >10 -/±

RM-D645 for CDP-CA9ES

MUSIC SCAN

Number buttons

>20

(

=/+

0/)

RM-D515 for CDP-CA8ES

MUSIC SCAN

Number buttons

>20

(

=/+

0/)

Playing CDs

To locate	Press
The next or	± repeatedly until you find the
succeeding tracks	track
The current or	- repeatedly until you find the
preceding tracks	track
A specific track	Number button of the track
directly
A track by scanning	MUSIC SCAN before you start playing
each track for 10	in 1Ê DISC Continuous Play mode.
seconds (Music	When you find the track you want,
Scan)	press ( to start playing.
A point while	) (forward) or 0(backward) and
monitoring the sound	hold down until you find the point
A point quickly by	0/) and hold down until you
observing the display	find the point. You will not hear the
during pause	sound during the operation.

When you directly locate a track numbered over 10 (or 20 when using the remote)

Press >10 (or >20 on the remote) first, then the corresponding number buttons. To enter “0,” use button 10.

Example: To play track number 30

Press >10 (or >20 on the remote) first, then 3 and 10.

You can extend the playing time during Music Scan

Press MUSIC SCAN repeatedly until the playing time you want (10, 20 or 30) appears in the display. Each time you press the button, the playing time changes cyclically.

Note

If “–OVER–” appears in the display, the disc has reached the end while you were pressing ). Press 0or - to go back.

9