Playing CDs
Replacing Discs While Playing a Disc
You can open the disc tray while playing a disc so that you can check what discs are to be played next and replace discs without interrupting playback of the current disc.
DISC SKIP |
Locating a Specific Disc
You can locate any disc before or while playing a disc.
DISC 1 – 5 | ( | DISC SKIP |
1Press
2Replace discs in the compartments with new ones. The player plays the disc on the left side compartment after the current disc, and then the one on the right side compartment.
3Press DISC SKIP.
The disc tray turns and other two disc compartments appear.
4Replace discs in the compartments with new ones.
5Press
Notes
•If the playback of the current disc ends while the disc tray is open, the player stops playing. If the disc is played in
1Ê DISC Repeat mode (see page 10), the current disc starts playing again.
•In ALL DISCS Shuffle Play mode (see page 10), tracks are reshuffled on the current disc, while the disc tray is open.
•In Program Play mode (see page 11), only the tracks on the current disc are played.
•Do not push the disc tray to close it in Step 5, as you may damage the player.
| |
MUSIC SCAN | DISC SKIP |
| |
| DISC 1 – 5 |
( 
MUSIC SCAN
DISC SKIP
DISC 1 – 5
( 
To locate | Press |
|
|
The next disc | DISC SKIP while playing a disc |
|
|
A specific disc directly | DISC 1 – 5 |
|
|
A disc by scanning the first | MUSIC SCAN before you start |
track of each disc for 10 | playing in ALL DISCS |
seconds (Music Scan) | Continuous Play mode. When |
| you find the disc you want, |
| press ( to start playing. |
|
|
You can extend the playing time during Music Scan 
Press MUSIC SCAN repeatedly until the playing time you want (10, 20 or 30) appears in the display. Each time you press the button, the playing time changes cyclically.
8
