9.4 DISCHARGE CHUTE
WARNING: DO NOT put hands or feet near or under rotating parts. Keep clear of discharge opening at all times.
WARNING: NEVER direct discharge of material toward bystanders nor allow anyone in front of equipment while unit is in operation. Be familiar with area of operation.
Remove mounting clips from discharge chute, oil and position chute on auger/impeller housing. Secure discharge chute with mounting clips and hardware.
NOTE: Chute must rotate freely. To adjust the gears tighten or loosen the lower nut (Figure 20). This will adjust the spring tension on the gears.
1 | 2 |
|
3
4
5 
6 
7
8
1. | Chute Crank | 6. | Friction Plate |
2. | Gear Cover | 7. | Compression Spring |
3. | Pinion Gear | 8. | Locking Center Nut |
4. | Chute Gear |
|
|
5. | Chute Support Bracket |
|
|
Figure 20 | PS0601 |
|
9 - 27