Discharge Chute Control
IMPORTANT: If chute does not stay in set position, adjust as directed in SERVICE AND ADJUSTMENTS on page 22, or repair before operation.
Rotate the Chute with Discharge Chute Control.
Figure 13 | OS7105 |
|
IMPORTANT: DO NOT force frozen chute controls. If frozen, take to warm place until controls are free.
Heated Handles
Differential
Lock Knob
1
2
Figure 14
1
Turn the heated handles switch to the ON (1) position to activate. Turn the switch to the OFF (2) position to
Scraper Blade
The scraper blade allows the back of the housing to keep better contact with the surface being cleared. It
2 deactivate.
OS1950
Differential Lock (926021, 022, 023)
(Figure 14)
The differential can be locked for maximum traction or unlocked to allow for easier turning. The differential lock knob is located on the right Track Assembly. With the differential locked power is applied equally to both tracks.
To engage the differential lock:
Pull and turn knob to LOCKED (1) position and release (knob will snap in place when positioned correctly).
To release the differential lock:
Pull and turn knob to the UNLOCKED (2) position and release (knob will be positioned out slightly from unit when positioned correctly).
also prevents damage to the housing from normal wear.
IMPORTANT: DO NOT allow Scraper Blade to wear too far or Auger/Impeller housing will become damaged.
Runners
The runners control the distance between the scraper blade and the ground. Adjust runners equally to keep blade level with the ground. Refer to
GB - 15