8 |
| 932103, 310 | 1. Mounting Hardware | |
9 | 1 | 2. Spring Clip | ||
| ||||
|
| 2 | 3. Chute Support Bracket | |
|
|
| ||
|
| 3 | 4. Discharge Chute | |
|
| 5. Discharge Chute Ring | ||
|
|
| ||
|
|
| 6. Retaining Clip | |
|
|
| 7. Belt Cover | |
|
|
| 8. Chute Crank | |
|
|
| 9. Chute Crank Support | |
|
| 4 |
| |
|
| 5 |
| |
|
| 6 |
|
7
Figure 4a
OS2090
Discharge Chute (932102)
1.Grease discharge chute ring if not already greased (Figure 4b).
2.Remove mounting hardware from top of engine.
3.Slide discharge chute over opening on housing and under the retaining clip.
4.Secure chute support bracket to studs on top of engine with mounting hardware just removed.
NOTE: Be sure the discharge chute sits flush on the discharge chute ring before tightening.
| 932102 | |
1 | 1. Mounting Hardware | |
| ||
6 | 2. Discharge Chute | |
3. Discharge Chute Ring | ||
| ||
| 4. Retaining Clip | |
2 | 5. Belt Cover | |
| 6. Chute Support Bracket | |
4 |
| |
3 |
| |
5 |
|
Figure 4b | OS1921 |
Check Attachment Clutch Cable
1.Ensure spring is connected into hole in clutch arm at rear of frame.
2.Ensure clutch cable is routed over the top of the lower handlebar.
GB - 12