AUGER EDGE REPLACEMENT

Over time the rubber edges of the auger will wear. Contact your Ariens Dealer for replacement.

IMPORTANT: Replace rubber edges before metal auger begins to wear.

NOTE: After replacement of auger rubber edges, adjust scraper blade. See Scraper Blade Adjustment below.

SCRAPER BLADE ADJUSTMENT

IMPORTANT: Damage to auger/impeller housing will result if blade wears down too far.

Scraper blade is adjustable to compensate for wear.

To adjust scraper blade:

1.Tip unit back onto handlebar, support housing and loosen nuts retaining blade.

2.If unit does not scrape cleanly, move scraper blade forward. If unit does not drive forward and scraper blade drags, move scraper blade to the rear.

Tighten hardware and test unit. Repeat adjustment as required until proper operation is obtained.

STORAGE

WARNING: AVOID INJURY. Read and understand Storage Safety Rules in Safety section before proceeding.

LONG TERM

Clean unit thoroughly with mild soap and low pressure water and lubricate (see Maintenance). Touch up all scratched painted surfaces.

SHORT TERM

IMPORTANT: NEVER spray unit with high pressure water or store unit outdoors.

Run with attachment clutch engaged a few minutes after each use to free unit of any loose or melting snow.

Inspect unit for visible signs of wear, breakage or damage.

Keep all nuts, bolts and screws properly tightened and know unit is in safe working condition.

Store unit in a cool, dry protected area.

Remove weight from wheels by putting blocks under frame or axle.

When storing unit for extended periods of time, remove all fuel from tank and carburetor (run dry). Refer to Engine Manual.

TROUBLESHOOTING

PROBLEM

PROBABLE CAUSE

CORRECTION

 

 

 

 

 

 

Engine will not

1. Fuel tank is empty.

1. Fill fuel tank.

crank/start.

2. Build up of dirt and residue

2. Clean area around governor/

 

around governor/carburetor.

carburetor.

 

3. Key Switch not in run

3. Put Key Switch into run

 

position.

position.

 

4. Electric starter not

4. Check for a bad starter or

 

functioning.

connections.

 

5. Engine ignition problems.

5. See Engine Manual.

 

 

 

GB - 21

Page 21
Image 21
Ariens 932103 - 624, 932102 - 520, 932310 - 624 manual Storage, Troubleshooting

932103 - 624, 932102 - 520, 932310 - 624 specifications

Ariens is a well-known brand in the outdoor power equipment industry, particularly recognized for its high-performance snow blowers. Among its notable models, the Ariens 932310 - 624, 932102 - 520, and 932103 - 624 stand out for their robust construction and innovative features designed to tackle harsh winter conditions.

The Ariens 932310 - 624 is engineered for heavy-duty snow removal with a 24-inch clearing width and a powerful 624cc engine. This model features a reliable Ariens Polar Engine that provides efficient power and ensures consistent performance even during the coldest months. The durable housing construction, combined with a heavy-duty steel frame, offers superior durability and stability, making it an ideal choice for homeowners and professionals alike.

The 932102 - 520 model, with its 20-inch clearing width, is designed for those who require a more compact yet powerful option. Equipped with a 520cc engine, it provides ample power for residential snow removal tasks. This model includes Ariens' patented Auto-Turn technology, allowing for easy maneuverability around trees, mailboxes, and sidewalks. The lightweight, compact design enables storage in smaller spaces, making it suitable for urban environments.

On the other hand, the Ariens 932103 - 624 combines the best features of performance and versatility. With a larger 24-inch clearing width and a powerful 624cc engine, this model excels in clearing heavy snowfall. It also includes features like adjustable chute control, allowing users to direct snow where they want it to go with minimal effort. The heavy-duty tires provide excellent traction, necessary for navigating slippery driveways and pathways.

All three models come equipped with essential safety features, including an ignition switch and safety key to prevent accidental starts. Their ergonomic handlebars and controls are designed for comfort, ensuring ease of use regardless of the operator's experience level. Additionally, each model boasts a two-stage snow removal system that efficiently manages heavy snow, ensuring effective clearing with every pass.

In summary, the Ariens 932310 - 624, 932102 - 520, and 932103 - 624 models bring together powerful engines, durable construction, and advanced technology to provide effective snow removal solutions. They cater to different needs and preferences, making them versatile choices for anyone looking to combat snow build-up efficiently during winter.