8.Replace attachment drive belt (See Replace Attachment Drive Belt on page 18).
9.Check traction drive clutch adjustment. See Traction Drive Clutch Adjustment on page 17.
STORAGE
WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding.
SHORT TERM
IMPORTANT: NEVER spray unit with high pressure water or store unit outdoors.
Run with attachment clutch engaged a few minutes after each use to free unit of any loose or melting snow.
Inspect unit for visible signs of wear, breakage or damage.
Keep all nuts, bolts and screws properly tightened and know unit is in safe working condition.
Store unit in a cool, dry protected area.
LONG TERM
Clean unit thoroughly with mild soap and low pressure water and lubricate (see Maintenance). Touch up all scratched painted surfaces.
Remove weight from wheels by putting blocks under frame or axle.
When storing unit for extended periods of time, remove all fuel from tank and carburetor (run dry). Refer to Engine Manual.
SERVICE PARTS
Order the following parts through your Dealer:
Part No. | Description |
|
|
00036800 | Ariens |
| cartridges) |
|
|
21533400 | Spark Plug (939001, 002) |
|
|
07200108 | Impeller Belt |
|
|
07200109 | Stretch Fit Traction Belt |
|
|
53200500 | Shear Bolts |
|
|
ACCESSORIES
See your authorized Ariens dealer to add the additional accessories available to your
Part No. | Description | |
|
| |
73203100 | Slicer Bar* | |
|
|
|
72200600 | 120 | Volt Starter Kit |
|
|
|
73202500 | 240 | Volt Starter Kit* |
|
| |
72406500 | Front Weight Kit* | |
|
|
|
*Available in CE countries.
GB - 20