Description of the machine
EN | PORTHOLE | CONTROL |
| DOOR | |
|
|
PANEL
PORTHOLE DOOR HANDLE
CHEST
ADJUSTABLE FEET
PORTHOLE DOOR
| 1. | |
3 | use powder detergent. | |
1 | Before pouring in the | |
detergent, make sure that | ||
| ||
2 | extra compartment 3 has | |
| been removed. | |
| 2. main wash compartment: | |
| use powder or liquid | |
| detergent. If using the latter | |
| type of detergent, we |
recommend it is poured into the drawer immediately before you start the
3.extra compartment: Bleach
The use of extra compartment 3 excludes the pre- wash function.
washing additives compartment: for fabric softener or liquid additives. We recommend that the maximum level indicated by the grille is not exceeded, and that concentrated fabric softeners are diluted.
CHEST |
Always use the handle to open the porthole door (see figure).
Used to hold the soiled laundry. To open it, pull it outwards (see figure).
TOUCH CONTROL PANEL
To adjust the settings, gently press the icon inside the sensitive (touch control) area as illustrated in the figure.
Standby mode
This 
button briefly and wait for the machine to start up again.
CHANGE LANGUAGE
DETERGENT DISPENSER DRAWER
The detergent dispenser drawer is located inside the machine and can be accessed by opening the door. For more information on detergent measures, please refer to the chapter entitled “Detergents and
laundry”. Note: stick the label
showing the wash cycle descriptions and options on
the front of the detergent dispenser drawer. You will find the sticker in the pack containing this manual.
The first time the machine is switched on, the first language will flash on the display. The "
", "OK" and "V" symbols will appear on the display, in line with the 3 buttons on the right- hand side. The languages change automatically every 3"; alternatively, they can be changed by pressing the buttons next to the "
" and "V" symbols. Use the "OK" button to confirm the language, which will be set after 2". If no buttons are pressed, the automatic language change will begin again after 30".
The language may only be changed while the machine is switched off.
Press and hold the temperature 
+spin 
+delayed start 
buttons for 5''; a short beep sounds and the set language flashes on the display. Press the buttons next to the "
" and "V" symbols to change the language. Use the button next to the "OK" symbol to confirm the language, which will be set after 2". If no buttons are pressed, the language set previously will be displayed after 30". Switch on the machine.
4
