13
NA
Care and maintenance

Cutting off the water and electricity

supplies

•Turnoffthewatertapaftereverywashcycle.Thiswill
limit wear on the hydraulic system inside the washing
machineandhelptopreventleaks.
•Unplugthewashingmachinewhencleaningitanddu-
ringallmaintenancework.

Cleaning the washing machine

The outer parts and rubber components of the appliance
can be cleaned using a soft cloth soaked in lukewarm
soapywater.Donotusesolventsorabrasives.

Cleaning the detergent dispenser dra-

wer

Removethedispenserby
raising it and pulling it out
(see figure).
Wash it under running wa-
ter; this operation should be
repeatedfrequently.

Caring for the door and drum of your

appliance

•Alwaysleavetheportholedoorajarinordertoprevent
unpleasantodoursfromforming.

Cleaning the pump

The washing machine is fitted with a self-cleaning pump
whichdoesnotrequireanymaintenance.Sometimes,
small items (such as coins or buttons) may fall into the pre-
chamber which protects the pump, situated in its bottom
part.
! Make sure the wash cycle has finished and unplug the
appliance.
To access the pre-chamber:
1.usingascrewdriver,
remove the cover panel
on the lower front part of
the washing machine (see
figure);
2.unscrewthelidbyrota-
ting it anti-clockwise (see
figure): a little water may
trickleout.Thisisperfectly
normal;
3.cleantheinsidethoroughly;
4.screwthelidbackon;
5.repositionthepanel,makingsurethehooksaresecurely
inplacebeforeyoupushitontotheappliance.

Checking the water inlet hose

Checktheinlethoseatleastonceayear.Ifthereareany
cracks, it should be replaced immediately: during the wash
cycles, water pressure is very strong and a cracked hose
couldeasilysplitopen.
!Neverusesecond-handhoses.
1
2