4
NA
! This instruction manual should be kept in a safe place
forfuturereference.Ifthewasherissold,transferredor
moved, make sure that the instruction manual remains with
the machine so that the new owner is able to familiarize
himself/herselfwithitsoperationandfeatures.
!Readtheseinstructionscarefully:theycontainvitalinfor-
mation relating to the safe installation and operation of the
appliance.
Unpacking and levelling
Unpacking
1.Removethewasherfromitspackaging.
2.Makesurethatthewasherhasnotbeendamaged
duringthetransportationprocess.Ifithasbeendamaged,
contact the retailer and do not proceed any further with the
installationprocess.
3.Removethe4 protective
screws (used during tran-
sportation) and the rubber
washer with the correspon-
ding spacer, located on the
rear part of the appliance
(see figure).
4.Closeofftheholesusingtheplasticplugsprovided.
5.Keepallthepartsinasafeplace:youwillneedthem
againifthewasherneedstobemovedtoanotherlocation.
! Packaging materials should not be used as toys for
children.
Levelling
1.Installthewasheronaflatsturdyfloor,withoutrestingit
upagainstwalls,furniturecabinetsoranythingelse.
2.Ifthefloorisnotperfectly
level, compensate for any
unevenness by tightening
or loosening the adjustable
front feet (see figure); the an-
gle of inclination, measured
in relation to the worktop,
mustnotexceed2°.
Levelling the machine correctly will provide it with stability,
help to avoid vibrations and excessive noise and prevent it
fromshiftingwhileitisoperating.
Minimum Installation Spacing
This appliance may be installed in a recessed area, closet
oralcove.Theinstallationspacingisininchesandisthe
minimumacceptable.
*Additionalspacingshouldbeconsideredforeasyinstal-
lation, servicing and compliance with local codes and
ordinances.Installationsmustconformwiththeminimum
dimensionsindicated.
0" *
0" *
Recessed Front View
1" *
1"
Side View