DIMENSIONS FOR P10 S / P15 S
|
|
|
|
| 0,8" |
|
|
|
E |
|
|
|
|
|
|
| |
|
|
|
|
| C |
|
| |
|
|
|
|
|
|
|
|
|
| MOD | A | B | C |
| D | E |
|
|
|
|
|
|
|
|
|
|
| P10 S | 14" | 10 1/4" | 14" |
| 3 1/2" | 6 1/8" |
|
|
|
|
|
|
|
|
|
|
| P15 S | 14" | 12 1/4" | 14" |
| 3" | 6 1/8" |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
General Remarks
Caution The manufacturer cannot be responsible for the damages caused by improper installation or by failure to follow instructions in this pamphlet. Comply with the installation instructions before completing electric connection.
Caution The thermostat has been
scald injury, keep the thermostat at the warm position. (letter M, Fig.
Caution Hydrogen gas can be produced in a hot water system served by this heater that has not been used for a long period of time (generally 2 weeks or more). Hydrogen gas is extremely flammable. To reduce the risk of injury under these conditions, it is recommended that the hot water faucet be opened for several minutes at the kitchen sink before using any electrical appliance connected to the hot water system. If hydrogen is present, there will probably be an unusual sound such as air escaping through the pipe as the water begins to flow. There should be no smoking or open flame near the open faucet at this time.
Installation Instructions
| The P 10S and P 15S water heaters can be installed under the sink. |
Wall | Fasten the supplied mounting bracket to the wall. Use screws that are suitable for the wall |
Mounting | material and the weight of the heater. |
| Hang the water heater on the bracket. Tug downwards on the heater to ensure that both |
| "fingers" of the bracket are seated in the mounting slots. |
3
