Anti-condensation strip*
After installing the dishwasher, open the door and stick the adhesive transparent strip under the wooden shelf in order to protect it from any condensation which may form.
Advice regarding the first wash cycle
After the appliance has been installed, immediately before running the first wash cycle, completely fill the salt dispenser with water and add only then approximately 1 kg of salt (see chapter entitled Rinse aid and refined salt). The water may overflow: this is normal and is not a cause for concern. Select the water hardness value (see chapter entitled Rinse aid and refined salt). - After the salt has been poured into the machine, the LOW SALT indicator light* switches off.
If the salt container is not filled, the water softener and the heating element may be damaged as a result.
The machine has a buzzer/set of tones (depending on the dishwasher model) to inform the user that a command has EN been implemented: power on, cycle end etc.
The symbols/indicator lights/LEDs on the control panel/ display may vary in colour and may have a flashing or fixed
light (depending on the dishwasher model).
Technical data
Dimensions | width 59.5 cm | |||
height 82 cm | ||||
|
|
| depth 57 cm | |
Capacity | 14 standard | |||
|
|
|
| |
Water supply pressure | 0,05 ÷ 1MPa (0.5 ÷ 10 bar) | |||
7,25 – 145 psi | ||||
|
|
| ||
Power supply voltage | See appliance data plate | |||
Total absorbed power | See appliance data plate | |||
|
| |||
Fuse | See appliance data plate | |||
|
|
|
| |
|
|
| This dishwasher conforms | |
|
|
| to the following European | |
|
|
| Community Directives: | |
|
|
| ||
|
|
| ||
|
|
| Compatibility) | |
|
|
| ||
|
|
| 1016/2010) (Ecodesign) | |
|
|
| ||
|
|
| ||
|
|
| ||
*Only available in selected models.
5
