burner.
To turn on one of the rings, press the relative knob in all the
way and turn it
Since the burner is equipped with a safety device "F", after lighting the burner keep the knob pressed in for about 6 seconds to allow the device which keeps the flame lit automatically to heat up.
The selected burner can be regulated using the corresponding knob, as follows:
•Off
High
Low
To turn off a burner, turn the knob clockwise until it stops (it should be on the “•” setting).
Electric Hot Plate (only on certain models)
The hot plate can be: "normal" and "fast". The latter can be identified by a red boss in the center of the hot plate itself.
The hot plate can be regulated by turning the corresponding knob in the clockwise or
0Off
1Low
6High
The section entitled, "Practical Cooking Advise", provides information on the recommended settings for various types of food or cooking processes.
When the knob is on any of the settings other than "Off", the "H" operating light comes on.
How to Keep Your Hob in Shape
Before cleaning or performing maintenance on your appliance, disconnect it from the electrical power supply.
To extend the life of the hob, it is absolutely indispensable that it be cleaned carefully and thoroughly on a frequent basis, keeping in mind the following:
·Do not use steam equipment to clean the appliance.
• The enamelled parts and the glass top, if present, must be washed with warm water without using abrasive powders or corrosive substances which could ruin them;
• The removable parts of the burners should be washed frequently with warm water and soap, making sure to remove
• On hobs with automatic ignition, the end of the electronic ignition device must be cleaned carefully and frequently, making sure that the gas holes are not clogged;
•The electric hobs should be cleaned using a damp cloth and then rubbed with oil while still warm;
•Stainless steel can be stained if it remains in contact with highly calcareous water or aggressive detergents (containing phosphorous) for an extended period of time. It is recommended that these parts be rinsed thoroughly with water and then dried well. It is also a good idea to clean up any spills.
Greasing the Taps
The taps may jam in time or they may become difficult to turn. If so, the tap itself must be replaced.
N.B.:This operation must be performed by a technician authorised by the manufacturer.
13