ARRIFLEX 416 Quick Guide 05/2006, Page 10
Mounting the Magazine
• Insert the magazine throat into the magazine aperture in the back of the camera body and slide the
magazine forward until it locks in place.
Note: If the Shoulder Pad is attached to the camera, you will need to push down on the Shoulder Pad with your
hand or the magazine before inserting the magazine.
• Flip the silver Safety Catch on the Magazine Release Lever forward to prevent accidental release of the
magazine.
• Inch the camera by briefly pressing the PHASE button.
Note: When a magazine is first mounted and PHASE or RUN is pressed, the display shows ‘loop’, while the
camera performs a short routine that centralizes the film loop.
Mounting the MagazineSafety Catch
Magazine
Release Lever