Changing Fps & Shutter Angle

The NORM and PS/CCU buttons above the display select between preset Standard Speeds and user adjustable Programmable Speeds. Standard Speeds of 23.976, 24, 25, 29.97 & 30 fps are possible, while the Programmable Speed can be set anywhere from 1.000 - 75.000 fps.

Note: If LOCK shows in the display, the camera settings are locked. To unlock, briefly press the LOCK button.

Setting a Standard Speed (NORM)

•Make sure the display is in mode 1 (black bar visible). If not, repeatedly press MODE until it is. If PS/CCU shows in the display, press NORM.

•Pressing SEL cycles through the Standard Speeds. Each speed will flash for approximately 3 seconds.

NORM PS/CCU LOCK

MODE

SEL/∆

SET/ V

• While the desired speed is flashing, press SET to set the speed.

Setting a Programmable Speed (PS/CCU)

•Press PS/CCU to switch from NORM to PS/CCU.

•Press MODE once to switch the display from mode 1 to mode 2.

•Pressing SEL selects one digit after another. The selected digit will flash.

•Press SET to increment the value of the flashing digit by 1.

•Repeat the last 2 steps for all the digits that need to be changed. Final confirmation of the set speed is not necessary.

Checking the Mirror Shutter Angle

•With the camera in Standby, press and hold PHASE. The camera will inch at approximately 1 fps.

•After 2 seconds the top line of the display shows the open angle of the mirror shutter, while the bottom line will show the supply voltage

Display in mode 1. Speed set at 24.000 fps

Display in mode 2. Speed set at 75.000 fps

Display with PHASE button pressed. Open mirror shutter angle 172.8º and supply of voltage 26.9.

Changing the Mirror Shutter Angle

 

 

Note: Before adjusting the mirror shutter, check that it is in the

416 Shutter Tool

Mirror Shutter centre

viewing position then turn off the camera and remove the

 

 

battery or power cable! Accidentally running the camera

 

 

during adjustment would cause catastrophic damage!

 

 

•Remove the lens or lens port cavity cap and hold the mirror shutter still by lightly pressing your finger on its black centre area. Do NOT touch the reflective surface.

•Insert the 416 Shutter Tool into the adjustment hole below the

mirror centre.

•Turn the 416 Shutter Tool until the desired Mirror Shutter preset angle is reached. Angle presets are: 180º, 172.8º, 150º, 144º, 135º, 90º & 45º. Turning counter-clockwise reduces the angle.

ARRIFLEX 416 Quick Guide 05/2006, Page 11

Page 10 Page 12
Page 11
Image 11
ARRI 416 manual Changing Fps & Shutter Angle
Page 10 Page 12

416 specifications

The ARRI 416 is a professional motion picture camera that has garnered a reputation for its versatility, reliability, and superb image quality. Renowned for its performance in both film and television production, the ARRI 416 blends cutting-edge technology with a user-friendly design, making it a favorite among cinematographers around the globe.

One of the most notable characteristics of the ARRI 416 is its capability to shoot in 16mm format, which provides a unique aesthetic that is often sought after in independent and experimental filmmaking. This camera is equipped with a stunning 16mm gate that ensures exceptional film transport and exposes the film accurately, delivering stunningly sharp images with a distinct visual quality that only film can provide.

The ARRI 416 features a modular design, which allows cinematographers and technical crews to customize the setup according to the specific needs of a shoot. This flexibility means that it can easily be adapted for various shooting conditions, whether in a controlled studio environment or challenging outdoor scenarios. Its compact size and lightweight frame facilitate hand-held shooting, while also allowing for easy installation on drones and other aerial platforms.

Equipped with advanced camera technologies, the ARRI 416 includes features such as a synchronized shutter mechanism that reduces the risk of flicker and enhances the overall shooting experience. Additionally, the camera supports a wide range of lenses, providing filmmakers with numerous creative options to achieve their desired look.

The ARRI 416 also embraces modern technologies, including the integration of electronic components that improve workflow efficiency. This includes built-in displays for monitoring settings and film status in real-time, allowing directors and cinematographers to keep track of their shots without interruption.

Durability and resilience are also key characteristics of the ARRI 416. Constructed with high-quality materials, this camera is designed to withstand the rigors of film production, ensuring consistent performance even in the most demanding environments.

In summary, the ARRI 416 stands out due to its rich feature set, incorporating both traditional filmmaking values and modern technology, making it an invaluable tool for filmmakers aiming to achieve artistic excellence.
Top Page Image Contents