Note: For more detailed hardware installation instructions, please refer to the IPC 1000 series User’s Manual.
Step 1. Preparation
Connect the phone to perform basic configurations
Connect an analog phone to the FXS port of IPC 1000 series unit as the picture below and power on.
Please notices that do not connect phone line of the telephone company to the FXS port as doing so may cause damage to the product!
Connect a phone to the IPC 1000 series unit
Step 2.Configure Region ID
Skip this step if you are installing your IPC 1000 series unit in the default region. The default Region ID is printed on the label located outside the box. If you are installing your IPC 1000 series unit at any region other than that which is specified, you will need to configure the IPC 1000 series unit to the correct Region ID.
