Note: If the IPC 1000 series unit’s IP address has been set to public or static IP mode; you must configure the IP Address and Subnet Mask of the PC to be in the same subnet as the IPC 1000 series unit rather than using IP address “192.168.0.5” and Subnet Mask “255.255.255.0” as the above illustration demonstrates.
3. Entering the Web Based Management Interface
The IPC 1000 series
unit’s IP address
Fill in”WEB” (all capitals) and the password that you have configured in the basic configuration section
Press the “OK” button
4. Configuring the IPC 1000 series unit’s IP Modes using the Web Based Interface
Note: If you need to configure any other parameters after the IP mode configuration is done, do not restart the IPC 1000 series unit as it will use the new IP setting. When this happens, you may no longer be able to access the IPC 1000 series unit using a web browser. You will then need to use a phone or console to configure the IP back to its default or fixed IP address such as “192.168.0.2”.
