Causes of pH change:

Causes of pH change:

adding water.

rain.

bather load.

adding chemicals.

dust.

algae.

CARE FOR YOUR SPA

DRAINING YOUR SPA

Drain and re-fill the spa as indicated below:

Average Use:

Every 60 - 90 days

Heavy Use:

Every 30 days

After Parties:

Drain

Before draining your spa you may add whirl-o-clean to the warm water and start the pump for about 30 minutes. This will help in eliminating grease and oils in the plumbing and jets.

WARNING

Do not leave your spa exposed to direct sunlight when there is no water in the spa. Exposure to direct sunlight could damage the spa shell and void your warranty.

To drain the spa:

1.Turn off all power to your spa.

2.Attach a hose to the hose bib at the bottom of the spa and gravity drain by the siphon method.

3.Clean the surface (see “Spa Surface” later in this section).

4.Refill the spa. Follow the initial start-up procedures to re- prime the spa.

24

Page 26
Image 26
Aruba Spa 2003 Serenade, 2003 Escape manual Care For Your Spa, Draining Your Spa, Causes of pH change, To drain the spa