Aruba Spa 2003 Breeze manual Hydrotherapy Jets, Micro Directional, air flow may be restricted

Micro Swirl

HYDROTHERAPY JETS

Your spa is equipped with the follow- ing jets:

You can adjust the volume of water

from these jets by turning the face Adjustable jets plate clock wise to decrease the vol-

ume of water and counter clock wise to increase it. You can also change the direction of the water flow by pushing on the side of the small orifice in the centre of the trim kit.

Micro Directional

WARNING:

All jet trim kits must be properly seated or

air flow may be restricted

You can adjust the volume of water from the micro swirl jets by turning the face plate 1/2 turn clockwise to decrease the volume of water and counter clock wise to increase it.

The micro-swirl jets on your spa are interchangeable. To remove either trim kit you must place a screwdriver between the face plate and the acrylic

spa surface then push with a gentle upwards motion and the trim kit will pop out of the jet body. To replace just place the trim kit into the jet body and gently push it into place. Be careful not to scratch the spa surface with the screwdriver and do not force the trim kit into or out of the jet body. To remove adjustable jets, pop them out an inch then unscrew them.

14