Troubleshooting

PROBLEM

Poor TV Reception

Poor radio reception (FM modulator installed)

No power to LCD

Power but no video or sound

IR sensor inoperative

SOLUTION

•Perform auto programming of the tuner

•Verify antenna condition.

•NOTE: Due to the nature of TV signals, vehicle motion, direction the vehicle is facing, distance from the transmitter, nearby surroundings and weather may adversely affect TV reception. These conditions may result in the following: picture roll, “snowy” picture, or momentary loss of color. Please refer to page 2 for more information on TV reception.

•Check the condition of the vehicle’s radio antenna.

•Verify that the antenna is fully raised

•If a wired RF modulator has been installed, verify that it’s switch is turned to the off position

•Verify +12VDC on red wire at power harness going to the video pod. Verify ground connection.

•Verify connections at both ends of source component harness.

•Verify that the batteries in the remote are fresh

•Verify that the remote eye is not obstructed.

•Verify that the infrared transmitter is affixed over the

sensor eye of the component

 

to be controlled

-15-

 

Specifications

65°C

~ 85°C

@ 16Ω

.

11 x 11.2 Inch W x D)