Asante Technologies 5324 user manual Port LEDs

			Port LEDs
Port LEDs		The IntraSwitch has five rows of LEDs. The following table
		states their color and meaning:
			Table 3-1 Port LEDs
	LED	Color	Meaning
	100Mbps	green	10/100TX port or an installed MII expansion port is
			operating at 100Mbps speed.
			Note: These LEDs only function with ports capable of
			operating at 100Mbps speed (i.e., the 10/100TX port or
			an installed 10/100 MII module).
	Max Util	amber	The corresponding port’s receive buffer is full
			(maximum utilization).
			Note: It is normal to see these LEDs light when the
			network is in a state of moderate-to-heavy activity.
	FDP/Col	amber	Indicates full duplex mode on the 10/100TX port or on
			an installed MII expansion port.
			Indicates a collision at the switching port for those
			ports operating in half-duplex mode.
			Note: Full duplex means that a port can transmit and
			receive at the same time.
			Note: Collision is indicated only on those ports
			operating in half duplex mode.
	Data	green	Traffic activity is occurring on the port (transmit [TX]
			or receive [RX]).
			Note: During heavy traffic periods, this LED may be lit
			continuously.
	Link	green	A node or other network device is properly connected
			to the corresponding port.

Page 3-3