Asante Technologies 5324 user manual Reset Eeprom to Default, Reset EEProm to Default command line

Console Management

Reset EEPROM to Default

This option resets the IntraSwitch’s values to the factory default.

▲	Important: This procedure reverts all informa-
	tion to the factory default settings except for
	the switch’s IP address, subnet mask, and
	default gateway.
	See “Factory Defaults” on page 1-9 for a list of all
	the switch’s factory default settings.
To reset the EEProm:
1	Type e from the Configuration Menu.
	The following command line appears at the bot-

tom of the Configuration Menu:

Figure 5-13 Reset EEProm to Default command line

2	Type y to reset the EEPROM to default or N to
	cancel the reset.
3	Reset the IntraSwitch by turning the switch off,
	and then on again.

Page 5-34