Connecting Network Cable
The GX5-424W switch supports 10 Mbps Ethernet or 100 Mbps Fast Ethernet and runs both in half and full duplex mode using Category 5 cable.
The GX5-424W switch also supports 2 port 1000 Mbps Gigabit Ethernet that runs in auto- negotiation mode and 10 Mbps Ethernet or 100 Mbps Fast Ethernet that runs both in half and full duplex mode and 1000 Mbps Gigabit Ethernet runs in full duplex mode using four pair of Category 5 Cable.
These RJ45 ports support Auto-Uplink. The switch can automatically detect and correct common wiring errors; you can use either standard or crossover RJ45 Category 5 UTP cable.
An additional 2-port SFP Mini-GBIC slot is included for an optional SFP Mini-GBIC module.
AC Power
The GX5-424W switch uses the AC power supply 100–240 VAC, 50–60 Hz. The power switch is located at the rear of the unit adjacent to the AC power connector and the system fan. The switch’s power supply will adjust to the local power source automatically and may be turned on without having any or all LAN segment cables connected.
Asanté FriendlyNET GX5-424W | User’s Manual | 7 |
