Operating Manual -
20 | 25 | 31.5 | 40 | 50 | 63 | 80 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | 630 | 800 | 1K | 1.25K | 1.6K | 2K | 2.5K |
MQX 2310
Stereo 31 Band
Graphic Equalizer
20 | 25 | 31.5 | 40 | 50 | 63 | 80 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | 630 | 800 | 1K | 1.25K | 1.6K | 2K | 2.5K |
5.CONTROLS
5.1Equalization
The individual equalization faders adjust the boost or cut at each filter frequency. There are 31 of these faders per channel on the
5.2 Gain
The gain control adjusts the overall gain of the equalizer when the EQ switch is “in”. It is generally used to compensate for level changes due to the equalization process, but can also allow the equalizer to adjust overall system level and gain structure. Overall gain with this control is from +6dB to
5.3 EQ In/Out Switch
This switches the Graphic Equalization and Gain adjustments. This way, the effect of any equalization can be compared to a “flat” response. This switch does not defeat the
5.4 Range Switch
This switch selects the operating range of the individual equalization faders to either ±15dB or ±6dB. The ±15dB settings should be used when much equaliza- tion is needed. The ±6dB setting allows finer resolution on the fader settings.
25 | 40 | 63 | 100 | 160 | 250 | 400 | 630 | 1K | 1.6K | 2.5K | 4K | 6.3K | 10K | 16K | Gain |
MQX 2150
Stereo 15 Band
Graphic Equalizer
|
|
| +6 |
|
|
|
|
|
+15 |
|
|
| EQ | Range |
| ||
+10 |
|
| +4 |
|
| Sig. Clip | ||
+5 |
|
| +2 |
|
| |||
0 |
|
| 0 |
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
|
|
| In | ±6dB | ||||
|
|
| ||||||
|
|
| Out | ±15dB | ||||
|
| - |
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |||
dB |
|
| Channel 1 |
|
4