Manuals / Ask Proxima / Computer Equipment / Projector

Ask Proxima C300 manual Setting Up The Lcd Panel

Models: C300

1 27

Download 27 pages 40.45 Kb

Page 8

USER GUIDE

LCD PANEL

5 SETTING UP THE LCD PANEL

Switch off all equipment before connecting the components. Be aware of static electricity that may build up, especially in the dry season and when operating on synthetic carpets. Discharge any static electricity by touching a metallic surface before you start.

Place the LCD panel on top of a transmissive overhead projector (OHP). Select a high intensity type projector, for instance 400 W halogen or metal- halide. Best results are obtained in a dimmed room with no direct sunlight shining in.

The following are guidelines for first time set-up:

Connect the cables and power supply as described in the rear foldout page (see Connection Layout).

Attach power to the LCD panel, turn the overhead projector and computer on. For more information on set-up see the following sections on Computer.

7

Image 8

Ask Proxima C300 manual Setting Up The Lcd Panel

Contents

Not the actual front page USER GUIDECAMPUS USER GUIDE CAMPUSUSER GUIDE LCD PANELTABLE OF CONTENTS The symbols and are used in this publication to indicate USER GUIDELCD PANEL This publication is printed on recycled paper2 INTRODUCTION Power Cable Power -5, 12, 5Remote Control LCD Data Panel5 SETTING UP THE LCD PANEL TO SET UP FROM THE REMOTE CONTROL 5.1 COMPUTERSTEP OPERATION6 USING THE LCD PANEL 6.1 REMOTE CONTROLFUNCTION REMOTE CONTROL KEYSCONTROL 6.2 CONNECTORS CONNECTOR6.3 LOCKING THE PANEL FUNCTION7 FEATURES DUAL SAFECOOL SYSTEMSET-UP MEMORY VGA TEXTCONTRAST BRIGHTNESSFREQUENCY TUNEON/OFF RESETPOSITION Check if the cables are connected and that power is on Check the ON/OFF key on the remote controlThe LCD image is completely black - Check the BLACK switch Check the CONTRAST and BRIGHTNESS settings Try the RESET keyYou may be too far away from the panel max. distance 7m/ 23 feet The remote control is not workingCheck if the batteries need replacement 9 MAINTENANCE 10 SERVICE11 TECHNICAL DATA GENERAL ENVIRONMENTAL LIMITSDISPLAY UNIT POWER SUPPLY REMOTE CONTROLRESOLUTION COMPATIBILITYCOMPUTER 12 CONNECTORSPOWER Fasten cables using mounting screws to ensure adequate EMI control 13 FCC STATEMENTINSTRUCTIONS TO USER Reorient the receiving antenna14 ENVIRONMENTAL STATEMENT RECYCLING / HANDLING+47 69 34 01 55 Norway 15 SERVICE INFORMATIONASK AS Customer Service Department RMA N-1602 FREDRIKSTAD NORWAY The foldout shows how to connect the LCD panel to the computer 16 CONNECTION LAYOUTUSER GUIDE LCD PANEL