USER GUIDE | LCD PANEL |
5.1COMPUTER
Connect the LCD panel, computer, monitor and power supply as shown in the rear foldout.
Connect cable (1) between the LCD panel and the computer. Use the Y- split on the computer end to connect the monitor.
If you have a Macintosh computer, insert applicable adapters (2) and (3) as shown.
Connect the power supply to the LCD panel (4).
TO SET UP FROM THE REMOTE CONTROL:
STEP | OPERATION |
1 | Press RESET for default settings |
2 | Adjust TUNE for a stable image. *) |
3 | Position the image correctly using the four POSITION keys |
5 | Adjust CONTRAST and BRIGHTNESS as desired |
*) If a stable image is not achieved using TUNE, try to adjust the BRIGHTNESS/CONTRAST setting as described later.
8
