Ask Proxima Impression 860 manual Connectors, Source 1/2/3

USER GUIDE LCD PROJECTOR

12 CONNECTORS

The connector ports for the source equipment on the LCD projector are located on the right hand-side (when facing) of the unit. The connector port for the mains power cord is located next to the fuse cabinet. The pinouts of all the connector ports is described in this section.

Do not connect any devices or cables other than those supplied with the LCD projector into the connector ports on the projector unit, even if the connector ports appear identical, as this voids any warranty and may cause permanent damage to the projector.

SOURCE 1 SOURCE 2 SOURCE 3 MOUSE

12.1SOURCE 1/2/3

These connectors relay all sync signals from the computer to the projector, and also to a local CRT monitor if required.

9			1	26 PIN HIGH DENSITY DSUB
18			10	FEMALE (FRONT VIEW)
26			19
1	ANALOG R IN	10	ANALOG R GND IN		19	HSYNC IN
2	ANALOG G IN	11	ANALOG G GND IN		20	C/VSYNC IN
3	ANALOG B IN	12	ANALOG B GND IN		21	DIGITAL GND
4	NOT USED	13	NOT USED		22	PCID0
5	NOT USED	14	NOT USED		23	PCID1
6	NOT USED	15	NOT USED		24	DIGITAL GND
7	ANALOG R OUT	16	ANALOG R GND OUT		25	HSYNC OUT
8	ANALOG G OUT	17	ANALOG G GND OUT		26	VSYNC OUT
9	ANALOG B OUT	18	ANALOG B GND OUT

40