USER GUIDE | LCD PROJECTOR |
The MEM column indicates whether the function setting is memorized for the source apparatus for future use.
KEY | FUNCTION | KEY TYPE | MEM |
CONTR | Contrast is the ratio between | scale | Yes |
| light and dark colors. Low | (up/down arrows) |
|
| contrast is recommended for |
|
|
|
|
| |
| contrast is used to enhance |
|
|
| details. |
|
|
BRIGHT | Brightness (whiteness) of the | scale | Yes |
| image can be altered to suit | (up/down arrows) |
|
| local lighting conditions. |
|
|
| Usually a bright, low contrast |
|
|
| image is preferred. |
|
|
TUNE | Adjusts the stability of the | scale | Yes |
| image. An unstable image | (up/down arrows) |
|
| can be seen as sideways |
|
|
| instability or ‘swimming’. |
|
|
| Provided that the frequency |
|
|
| setting is also correct, the |
|
|
| ‘swimming’can be removed |
|
|
| by adjusting TUNE (See |
|
|
| section Image Adjustments |
|
|
| for illustration). |
|
|
ON/OFF | Turns the projected image | toggle | - |
| ON/OFF. This will also |
|
|
| Power OFF the LCD |
|
|
| projector after a 5 min. delay. |
|
|
RESET | Defaults to the standard | single touch | - |
| settings for the active mode. | activated |
|
SOURCE 1 | Selects RGB input source 1 | 3 source keys | No |
| as active. |
| |
SOURCE 2 | Selects RGB input source 2 | are mutually | No |
| as active. | exclusive |
|
SOURCE 3 | Selects RGB input source 3 |
| No |
| as active. |
|
|
23
