15
USING THE PROJECTOR
This section describes how to use and make adjustments to the
projector. It also provides a reference to the keypad and remote
buttons and the options available from the on-screen menus.
Basic Image Adjustment
1Make sure you have powered up your equipment in the right
order (page 11).
2If the image doesn’t display completely, rotate the zoom ring
(below), adjust the height of the projector (page16) or center
the image by adjusting its horizontal or vertical posi tion
(page23). Be sure the projector lens is at a 90 degree angle to
the screen.
3If the image is out of focus, rotate the focus ring (below).
4If the colors don’t look right, adjust the brightness, contrast,
tint, or color (page2 1).
Adjusting the Projector
To focus the image, rotate the focus ring (Figure 10) until the
image is clear. To zoom the image, rotate the zoom ring. This
adjusts the image size.
NOTE: To obtain the best overall
focus quality, open the menu and
focus on the text. This will ensure
that the best overall image quality
is achieved.
FIGURE 10
Focus ring and zoom ring
focus ring
zoom ring
M2+.book Page 15 Thursday, April 8, 2004 8:10 AM