31
FIGURE 25
Inserting the screwdriver into the lamp housing tab
5Carefully remove the lamp housing. Dispose of the lamp in an
environmentally proper manner.
WARNING: Do not drop the
lamp module or touch the glass
bulb! The glass may shatter and
cause injury.
FIGURE 26
Removing the lamp housing
6Install the new lamp housing. Be careful to attach the connec-
tor on the lamp housing to the connector inside the projector.
These connectors are located near the leveling foot.
7Tighten all three screws.
8Plug in the power cord, then press the Power button to turn
the projector back on.
9To reset the lamp hour timer, navigate to the Setup/Service
menu and choose Reset lamptimer. See page 26 for details on
the Service menu.
tab
M2+.book Page 31 Thursday, April 8, 2004 8:10 AM