OPERATING INSTRUCTIONS
THE CONTROL PANEL
Your ASKO dishwasher has our
P R O G
Program
button
|
|
| S E T |
|
|
| M E N U |
|
|
|
|
Display | Programming | ||
window | buttons | ||
S TA R T
S T O P
P C - U P G R A D E
Start/Stop
button
DISPLAY WINDOW
The display window shows the programs, options, remaining program time and fault codes. It also allows you to access the program menus and customize the wash programs. If you select Delayed Start, the window will display the number of hours selected. When you press Start/Stop, the countdown time displays.
Remaining program time – The remaining program time is calculated by the time it took the program to run last time. (Note: The first time you run a program, the display will display 1:00.) As the program progresses, the time remaining displays the hour and minutes (e.g., 1:02, which means one hour and two minutes.)
PROGRAMS
To select a program, simply press the program button until the program you desire displays then press Start/Stop. The programs are described below. You can also change certain program features. See “Options” below.
Auto Wash
The dishwasher has sensors that detect the level of soil on the dishes and adjust the water consumption and temperature accordingly. You cannot adjust the temperature or drying time with this program.
Heavy Wash (Cold, 85° – 170°/Sani F)
For the heaviest soiled loads, such as casseroles or sauce pans.
Normal Wash (Cold, 85° – 170° F)
For normally soiled loads, such as plates, glasses, bowls, and lightly soiled pans.
Mixed Wash
Designed to wash heavily soiled dishes in the lower basket and lightly soiled dishes in the upper basket.
Upper Basket
Washes only the upper basket
Lower Basket
Washes only the lower basket
Delicate Wash (Cold, 140° F)
For delicate items, such as fine china and crystal, that are washed immediately after use. When using this program, you should set the temperature to low and dry the dishes without heat.
Quick Wash (Cold, 85° – 140° F)
For lightly soiled loads that are washed immediately after use. This program can also be used for delicate items, but you should set the temperature to low and dry the dishes without heat.
Rinse and Dry (120° F)
Rinses the dishes with hot water then activates the fan and heating element to dry them.
Rinse and Hold
To rinse dishes that you plan to wash later that day.
OPTIONS
Once you have selected a program, you can change some of the program features by using the options (described below). To select an option, simply press the Menu button until the option you desire displays, then press the Set button until the desired setting displays. Press Menu to confirm your selection. You can continue to make programming changes or press Start/Stop to start the program.
Delayed Start
This option allows you to delay starting the dishwasher from 1/2 hour to 24 hours. Press the Menu button until Delayed Start displays, then press Set until the number of hours you wish to delay starting the dishwasher displays along with a flashing clock symbol. Press Menu then press Start/Stop.
To cancel Delay after you press Start/Stop, hold down the Start/Stop button for three seconds. If you change your mind before you press Start/Stop, continue to press this button until “0” displays.
All Baskets
This option lets you set which spray arms will function. You have three choices:
All Baskets – Washes both the upper and lower baskets
Upper Basket – Washes only the upper basket Lower Basket – Washes only the lower basket
Temperature
The temperature can be changed in all programs, except Auto wash, Rinse and Hold, and Rinse and Dry. Your choices are: cold, 85°, 105°, 120°, 130°, 140°, 160°, and 170° F. (Note: The Delicate and Quick wash programs cannot be set over 140° F.) To select a temperature, press the Menu button until Temperature displays, then press the Set button until the desired setting displays. Press Menu to confirm your selection.
When you select 170° F, the word “Sani” displays.
Options continued on next page...
Page 7
