Aspire Digital 1660 manual Machine Disassembly and Replacement

Chapter 3

Machine Disassembly and Replacement

This chapter contains step-by-step procedures on how to disassemble the notebook computer for maintenance and troubleshooting.

To disassemble the computer, you need the following tools:

Wrist grounding strap and conductive mat for preventing electrostatic discharge Flat-bladed screw driver

Phillips screw driver Tweezers

Plastic Flat-bladed screw driver

Hexed Screw Driver

NOTE: The screws for the different components vary in size. During the disassembly process, group the screws with the corresponding components to avoid mismatch when putting back the components.

NOTE: This chapter has been revised from previous model (TravelMate 240/250). Please refer to the disassembling procedures instead of the images. Some of the images below contain the parts used in TravelMate 240/250, but not in Aspire 1660.

Chapter 3 46