S PA MAIN T E N A N C E
SPA LIGHT COLORED LENS REMOVAL
In your owners packet you will find colored lenses for your spa light. They can easily be installed or removed by placing them over the spa light and gently pushing on the outer edges to install and pulling along the edges to remove.
S PA LIGHT
LIGHT BUL B
LIGHT BULB REPLACEMENT
1.Turn off the power to the spa.
2.Remove the front panel of the spa.
3.Locate the spa light.
4.Turn the bulb counter - clockwise 1/4 turn to remove from its socket
5.The replacement bulb is locked into place by turning it clockwise 1/4 turn
6.Close up the cabinet and turn the power back on.
7.Check the Top Side display and adjust the time.
DIVERTER VALVE
Over a period of time sand or grit may intrude into your spa. The diverter valves may become difficult to turn. It is important that the debris be removed as soon as possible to avoid damage to the valve.
1.Turn off the power to the spa.
2.Remove the diverter handle by pulling upward and gently rocking it.
3.Grasp the collar and turn it counter- clockwise.
4.Lift the valve body up.
5.Wipe the valve body and interior walls of the valve with a soft cloth.
6.Inspect the valve and valve walls for any grooves caused by the debris.
7.Using a fine grit sandpaper, smooth down any deep furrows.
8.Wipe the valve and wall down with a damp cloth and remove any debris left behind.
9.Lubricate the valve body with a waterproof lubricant.
10.Reassemble the valve and restore the power to the spa.
11.Check the Top Side display and adjust for time.
PAGE 24
