Aspire Digital 5336 manual Main, Parameter Description Format/Option, Disabled

Main

The Main screen allows the user to set the system time and date as well as enable and disable boot options and recovery.

				InsydeH20 Setup Utility						Rev. 3.5
Information	Main		Security Boot		Exit
System Time				[08: 56:55]				Item Specific Help
System Date				[02/25/2010]				This is the help for the
Total Memory:				4095 MB				hour field. Valid range
Video Memory:				[64 MB]				is from 0 to 23.
								INCREASE/REDUCE: F5/F6.
Quiet Boot				[Enabled]
Network Boot				[Enabled]
F12 Boot Menu				[Disabled]
D2D Recovery				[Enabled]
SATA Mode				[AHCI Mode]
F1 Help		Select		Item	F5/F6	Change	Values	F9	Setup	Default
ESC Exit		Select		Menu	Enter	Select	SubMenu	F10	Save	and Exit

NOTE: The screen above is for your reference only. Actual values may differ.

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter	Description	Format/Option
System Time	Sets the system time. The hours are displayed with 24-	Format: HH:MM:SS
	hour format.	(hour:minute:second)
System Date	Sets the system date.	Format MM/DD/YYYY
		(month/day/year)
Total Memory	Displays the total memory available.	N/A
Video Memory	Displays the available memory for Video.	N/A
Quiet Boot	The notebook displays an illustration called the OEM	Option: Enabled or
	screen during system boot instead of the traditional	Disabled
	POST screen that displays the normal diagnostic
	messages.
Network Boot	Enables, disables the system boot from LAN (remote	Option: Enabled or
	server).	Disabled
F12 Boot Menu	Enables, disables Boot Menu during POST.	Option: Enabled or
		Disabled
D2D Recovery	Enables, disables D2D Recovery function. The function	Option: Enabled or
	allows the user to restore the system to factory defaults.	Disabled
SATA Mode	Control the mode in which the SATA controller should	Option: AHCI Mode or IDE
	operate.	Mode

Chapter 2 29