The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Format/Option

System Time

Sets the system time. The hours are

Format: HH:MM:SS

 

displayed with 24-hour format.

(hour:minute:second)

 

 

System Time

 

 

 

System Date

Sets the system date.

Format MM/DD/YYYY

 

 

(month/day/year)

 

 

System Date

 

 

 

System Memory

This field reports the memory size of the

 

 

system. Memory size is fixed to 640MB

 

 

 

 

Extended Memory

This field reports the memory size of the

 

 

extended memory in the system.

 

 

Extended Memory size=Total memory

 

 

size-1MB

 

 

 

 

VGA Memory

Shows the VGA memory size. VGA

 

 

Memory size=64/128MB

 

 

 

 

Quiet Boot

Determines if Customer Logo will be

Option: Enabled or

 

displayed or not; shows Summary Screen

Disabled

 

is disabled or enabled.

 

 

Enabled: Customer Logo is displayed, and

 

 

Summary Screen is disabled.

 

 

Disabled: Customer Logo is not displayed,

 

 

and Summary Screen is enabled.

 

 

 

 

Power on display

Auto: During power process, the system

Option: Auto or Both

 

will detect if any display device is

 

 

connected on external video port. If any

 

 

external display device is connected, the

 

 

power on display will be in CRT (or

 

 

projector) only mode. Otherwise it will be in

 

 

LCD only mode.

 

 

Both: Simultaneously enable both the

 

 

integrated LCD screen and the system’s

 

 

external video port (for an external CRT or

 

 

projector).

 

 

 

 

Network Boot

Enables, disables the system boot from

Option: Enabled or

 

LAN (remote server).

Disabled

 

 

 

F12 Boot Menu

Enables, disables Boot Menu during

Option: Disabled or

 

POST.

Enabled

 

 

 

D2D Recovery

Enables, disables D2D Recovery function.

Option: Enabled or

 

The function allows the user to create a

Disabled

 

hidden partition on hard disc drive to store

 

 

operation system and restore the system

 

 

to factory defaults.

 

 

 

 

NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is because the user is not allowed to control the settings in these cases.

38

Chapter 2

Page 44
Image 44
Aspire Digital 8930 manual Post