Peripheral-Related Symptoms
Symptom / Error | Action in Sequence |
System configuration does not match the | Enter BIOS Setup Utility to execute “Load |
installed devices. | Default Settings”, then reboot system. |
| Reconnect hard |
|
|
External display does not work correctly. | Press Fn+F5, LCD/CRT/Both display |
| switching |
| System board |
|
|
USB does not work correctly | System board |
|
|
Print problems. | Ensure the “Parallel Port” in the “Onboard |
| Devices Configuration” of BIOS Setup Utility is |
| set to Enabled. |
| Onboard Devices Configuration |
| Run printer |
| Printer driver |
| Printer cable |
| Printer |
| System Board |
|
|
Serial or parallel port device problems. | Ensure the “Serial Port” in the Devices |
| Configuration” of BIOS Setup Utility is set to |
| Enabled. |
| Device driver |
| Device cable |
| Device |
| System board |
|
|
Keyboard/Touchpad-Related Symptoms
Symptom / Error | Action in Sequence |
Keyboard (one or more keys) does not work. | Reconnect the keyboard cable. |
| Keyboard |
| System board |
|
|
Touchpad does not work. | Reconnect touchpad cable. |
| Touchpad board |
| System board |
|
|
Modem-Related Symptoms
Symptom / Error | Action in Sequence |
Internal modem does not work correctly. | Modem phone port |
| modem combo board |
| System board |
|
|
NOTE: If you cannot find a symptom or an error in this list and the problem remains, see “Undetermined Problems” on page 82.
80 | Chapter 4 |
