Chapter 2 31
PC Health
The PC Health screen displays CPU/Chipset temperature information and contains customizable safety
monitors for the CPU.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter Description Option
CPU Temperature Displays the current CPU temperature (°C). This field
is read only. N/A
CPU Fan1 Speed Displays the current CPU fan speed. This field is read
only. N/A
CPU Fan2 Speed Displays the current system fan speed. This field is
read only. N/A
+5.00V Displays the power supply voltage for the nominal 5V
bus. This field is read only. N/A
+3.30V Displays the power supply voltage for the nominal
3.3V bus. This field is read only. N/A
+1.1V Displays the nominal 1.1 V bus. This field is read only. N/A
+12.0V Displays the power supply voltage for the nominal
12.0V bus. This field is read only. N/A
Smart Fan Enabled allows auto fan control. If disabled the fan
runs continuously at maximum speed. Enabled or
Disabled.

CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends Inc.

PC Health

Help Item

CPU Temperature (PECI Mode) : 48°C
CPU Fan1 Speed : 2095 RPM
CPU Fan2 Speed : 2103 RPM
+1.1V : 1.15 V
+3.30V : 1.09 V
+5.00V : 5.05 V
+12.0V : 12.12 V
+1.5V : 1.45 V
Smart Fan [Enabled]
If disabled, System Fan
will run direstly the
maximum speed.

-/+/ : Value

:Move

F1: General Help

Enter:Select

F10 : Save ESC : Exit

F9 : Optimized Defaults