3.3 OC Tweaker Screen
In the OC Tweaker screen, you can set up overclocking features.
BIOS SETUP UTILITY
Main OC Tweaker Advanced H/W Monitor Boot Security Exit
CPU Configuration
Overclock Mode | [Auto] |
CPU Frequency (MHz) | [200] |
PCIE Frequency (MHz) | [100] |
Spread Spectrum | [Auto] |
Boot Failure Guard | [Enabled] |
Boot Failure Guard Count | [3] |
CPU Active Core Control | [All Cores] |
AMD Turbo Core Technology | [Auto] |
AMD | [Enabled] |
AMD APM | [Auto] |
Processor Maximum Frequency | x31.5 6300 MHZ |
North Bridge Maximum Frequency | x31.0 6200 MHz |
Processor Maximum Voltage | 1.5500 V |
Multiplier/Voltage Change | [Auto] |
HT Bus Speed | [Auto] |
HT Bus Width | [Auto] |
Overclocking may cause damage to your CPU and motherboard.
It should be done at your own risk and expense.
| Select Screen |
| Select Item |
Enter | Go to Sub Screen |
F1 | General Help |
F9 | Load Defaults |
F10 | Save and Exit |
ESC | Exit |
v02.54 (C) Copyright
CPU Configuration
Overclock Mode
Use this to select Overclock Mode. Configuration options: [Auto] and [Manual]. The default value is [Auto].
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
Spread Spectrum
This item should always be [Auto] for better system stability.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Boot Failure Guard Count
Use this item to configure Boot Failure Guard Count.
CPU Active Core Control
This allows you to adjust CPU Active Core Control feature. The configura- tion options depend on the CPU core you adopt. The default value is [All Cores].
AMD Turbo Core Technology
This item appears only when the processor you adopt supports this fea- ture. Use this to select enable or disable AMD Turbo Core Technology. Configuration options: [Auto] and [Disabled]. The default value is [Auto].
AMD C-State Support
This allows you to enable or disable AMD
36
