3.4.4 Storage Configuration
| BIOS SETUP UTILITY |
|
Advanced |
|
|
| Configure onboard | |
Storage Configuration | serial ATA | |
| controller. | |
Onboard SATA Controller | [Enabled] |
|
SATA Operation Mode | [AHCI] |
|
SATA IDE Combined Mode | [Enabled] |
|
SATAII_1 | [Hard Disk] |
|
SATAII_2 | [Not Detected] |
|
SATAII_3 | [Not Detected] |
|
SATAII_4 | [Not Detected] |
|
|
| Select Screen |
|
| Select Item |
| +- | Change Option |
| F1 | General Help |
| F9 | Load Defaults |
| F10 | Save and Exit |
| ESC | Exit |
v02.54 (C) Copyright | ||
Onboard SATA Controller
Use this item to enable or disable the “Onboard SATA Controller” feature.
SATA Operation Mode
Use this item to adjust Onboard SATA Operation Mode. The default value of this option is [AHCI]. Configuration options: [AHCI], [IDE] and [RAID].
If you set this item to RAID mode, it is suggested to install SATA ODD driver on SATAII_3 (PORT 5) and SATAII_4 (PORT 6) ports.
SATA IDE Combined Mode
This item is for SATAII_3 (PORT 5) and SATAII_4 (PORT 6) ports. Use this item to enable or disable SATA IDE combined mode. The default value is [Enabled].
If you want to build RAID on SATAII_3 (PORT 5) and SATAII_4 (PORT 6) ports, please disable this item.
45
