ASRock A75 Pro4/MVP 28

2.10 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard!

Serial ATA3 Connectors

(SATA3_1: see p.2, No. 15)

(SATA3_2: see p.2, No. 16)

(SATA3_3: see p.2, No. 14)

(SATA3_4: see p.2, No. 13)

(SATA3_5: see p.2, No. 12)

Serial ATA (SATA) Data Cable

(Optional)

	SATA3_5
SATA3 4	SATA3 3
SATA3 2	SATA3 1

These five Serial ATA3 (SATA3) connectors support SATA data cables for internal storage devices. The current SATA3 interface allows up to 6.0 Gb/s data transfer rate.

Either end of the SATA data cable can be connected to the SATA3 hard disk or the SATA3 connector on this motherboard.

English

USB 2.0 Headers

(9-pin USB6_7)

(see p.2 No. 28)

	(9-pin USB8_9)	USB_PWR
	(see p.2 No. 27)	P-9
	(see p.2 No. 27)	P+9
		P+9
		GND
		DUMMY
		1
		GND
		P+8
		P-8
		USB_PWR
	(9-pin USB10_11)	USB_PWR
	(see p.2 No. 25)	P-11
	(see p.2 No. 25)	P+11
		GND
		DUMMY
		1
		GND
		P+10
		P-10
		USB_PWR

Besides two default USB 2.0 ports on the I/O panel, there are three USB 2.0 headers on this motherboard. Each USB 2.0 header can support two USB 2.0 ports.

ASRock A75 Pro4/MVP Motherboard