ASRock Fatal1ty Z87 Professional manual Power LED Header Pin PLED1 See p.1, No

Power LED Header

(3-pin PLED1)

(see p.1, No. 18)

Serial ATA3 Connectors (SATA3_0_1:

see p.1, No. 11) (SATA3_2_3: see p.1, No. 12) (SATA3_4_5: see p.1, No. 13)

(SATA3_A1_A2: see p.1, No. 10) (SATA3_A3_A4: see p.1, No. 9)

USB 2.0 Headers

(9-pin USB4_5)

(see p.1, No. 22)

(9-pin USB6_7)

(see p.1, No. 23)

English

1

PLED-

PLED+

PLED+

SATA3_4_5 SATA3_2_3 SATA3_0_1 SATA3_A1_A2 SATA3_A3_A4

USB_PWR

P- P+ GND DUMMY

1

GND

USBP_-PWRP+

Please connect the chassis power LED to this header to indicate the system’s power status.

These ten SATA3 connectors support SATA data cables for internal storage devices with up to 6.0 Gb/s data transfer rate. If the eSATA port on the rear I/O has been connected, the internal SATA3_A4 will not function.

To minimize the boot time, use Intel® Z87 SATA ports (SATA3_0) for your bootable devices.

Besides four USB 2.0 ports on the I/O panel, there are two headers on this motherboard. Each USB

2.0header can support two ports.

26