ASRock FM2A75M-DGS manual Onboard Headers and Connectors

2.6 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard!

Serial ATA3 Connectors

(SATA_1: see p.2, No. 7)

(SATA_2: see p.2, No. 8)

(SATA_3: see p.2, No. 9)

(SATA_4: see p.2, No. 10)

(SATA_5: see p.2, No. 12)

(SATA_6: see p.2, No. 11)

Serial ATA (SATA) Data Cable

(Optional)

SATA 1	SATA 2
SATA 3	SATA 4
SATA 5	SATA 6

These six Serial ATA3 (SATA3) connectors support SATA data cables for internal storage devices. The current SATA3 interface allows up to 6.0 Gb/s data transfer rate.

Either end of the SATA data cable can be connected to the SATA3 hard disk or the SATA3 connector on this motherboard.

USB 2.0 Headers	Besides four default USB 2.0
(9-pin USB4_5)	ports on the I/O panel, there
(see p.2 No. 20)	are three USB 2.0 headers on
	this motherboard. Each USB 2.0
	header can support two USB
	2.0 ports.
(9-pin USB6_7)
(see p.2 No. 22)

(9-pin USB8_9)	USB_PWR
(see p.2 No. 21)	P-9
	P+9
	GND
	DUMMY
	1
	GND
	P+8
	P-8
	USB_PWR

17

English

ASRock FM2A75M-DGS Motherboard