2.3 Installation of Memory Modules (SO-DIMM)
IMB-110motherboard provides two 204-pin DDR3 (Double Data Rate 3) SO-DIMM
slots.
1.It is not allowed to install a DDR or DDR2 memory module into a DDR3 slot; otherwise, this motherboard and SO-DIMM may be damaged.
2.Please install the memory module from DDR3_A2 slot first.
Installing a SO-DIMM
Please make sure to disconnect the power supply before adding or removing SO-DIMMs or the system components.
Step 1. Unlock the SO-DIMM slot by pressing the retaining clips outward. Step 2. Align the SO-DIMM on the slot such that the notch on the SO-DIMM
matches the break on the slot.
The SO-DIMM only fits in one correct orientation. It will cause perma- nent damage to the motherboard and the SO-DIMM if you force the SO- DIMM into the slot in the incorrect orientation.
Step 3. Firmly insert the SO-DIMM into the slot until the retaining clips at both ends fully snap back in place and the SO-DIMM is properly seated.
