Chapter 3: UEFI SETUP UTILITY
3.1 Introduction
This section explains how to use the UEFI SETUP UTILITY to configure your sys- tem. The UEFI chip on the motherboard stores the UEFI SETUP UTILITY. You may run the UEFI SETUP UTILITY when you start up the computer. Please press <F2> or <Delete> during the
If you wish to enter the UEFI SETUP UTILITY after POST, restart the system by pressing <Ctl> + <Alt> + <Delete>, or by pressing the reset button on the system chassis. You may also restart by turning the system off and then back on.
Because the UEFI software is constantly being updated, the following UEFI setup screens and descriptions are for reference purpose only, and they may not exactly match what you see on your screen.
3.1.1 UEFI Menu Bar
The top of the screen has a menu bar with the following selections:
Main | For setting system time/date information |
OC Tweaker | For overclocking configurations |
Advanced | For advanced system configurations |
H/W Monitor | Displays current hardware status |
Boot | For configuring boot settings and boot priority |
Security | For security settings |
Exit | Exit the current screen or the UEFI SETUP UTILITY |
Use < 
> key or < 
> key to choose among the selections on the menu
bar, and use < 
> key or < 
> key to move the cursor up or down to
select items, then press <Enter> to get into the sub screen. You can also navigate with a mouse.
29
