3.4 Hardware Health Event Monitoring Screen
In this section, it allows you to monitor the status of the hardware on your system, including the parameters of the CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage.
CPU_FAN1 & 2 Setting
This allows you to set CPU fan 1 & 2’s speed. Configuration options: [Full On] and [Automatic Mode]. The default value is [Full On].
CHA_FAN1 Setting
This allows you to set chassis fan 1’s speed. Configuration options: [Full On] and [Automatic Mode]. The default value is [Full On].
Over Temperature Protection
Use this to enable or disable Over Temperature Protection. The default value is [Enabled].
Case Open Feature
This allows you to enable or disable case open detection feature. The default is value [Disabled].
Clear Status
This option appears only when the case open has been detected. Use this option to keep or clear the record of previous chassis intrusion status.
41
