Storage Configuration, Sata Controller | ASRock IMB-A160-H instruction

3.3.4 Storage Configuration

SATA Controller

Use this to enable or disable the SATA Controller.

SATA Mode

Use this to select the SATA mode for SATA3_1 to SATA3_4 ports. Configuration options: [IDE Mode], [AHCI Mode] and [RAID Mode]. The default value is [IDE Mode]. (Raid is not supported by AMD A50M)

SATA IDE Combined Mode

Use this to enable or disable SATA IDE combined mode.

Hard Disk S.M.A.R.T.

Use this to enable or disable S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology).

41

Image 41

ASRock IMB-A160-H manual Storage Configuration, Sata Controller, Sata Mode, Sata IDE Combined Mode, Hard Disk S.M.A.R.T

Contents

IMB-A160-H Disclaimer Copyright Notice Contents Uefi Setup Utility Introduction Package Contents Specifications Bios Feature ConnectorsRear Panel I/O Support CDPage ASRock Instant Flash Unique FeaturesASRock Crashless Bios IMB-A160 Motherboard Layout Lvds for IMB-A160 only LAN Port LED Indications I/O Panel Pre-installation Precautions Installation Installing Memory Modules Dimm Expansion Slots PCI Express Slots Installing an Expansion Card Installing Sata Hard Disks Power Connectors Pwrbtn Power Switch Installing the System PanelReset Reset Switch Pled System Power LED Pin LPT1 See p.10, No Onboard Headers and Connectors PIN CPU Fan Connector Inverter Power Control Header Optional Digital Input / Output Pin Header Jumpers Setup PWR-On Mode Jumper AT Mode Set Up Uefi Operating System SetupUsing Ahci Mode Using Ahci Mode Set Up Uefi Use RAID Installation Guide to set the RAID configuration Running The Support CD Installing DriversDrivers Menu Utilities Menu Hot Plug / Hot Swap Operation Guide What is Hot Plug and Hot Swap?Hot Plug and Hot Swap for Hard Disk Drives Points for attention, before you process Hot Plug / Hot Swap Step How to Hot Plug / Hot Swap a HDD How to Hot Unplug / Hot Swap a HDD Uefi Menu Bar Introduction Navigation Keys Main Screen Advanced Screen Cool ‘n’ Quiet CPU ConfigurationSVM Mode North Bridge Configuration Restore on AC/Power Loss South Bridge ConfigurationOnboard HD Audio Front Panel Sata Mode Storage ConfigurationSata IDE Combined Mode Sata Controller Super IO Configuration Acpi Configuration USB Mouse Power On USB Keyboard/Remote Power On Legacy USB Support USB ConfigurationUSB 2.0 Controller TPM Support Trusted Computing Hardware Health Event Monitoring Screen CPU FAN1 Setting Setup Prompt Timeout Boot ScreenBootup Num-Lock Boot From Onboard LAN Security Screen Exit Screen Load Uefi DefaultsSave Changes and Exit Discard Changes and Exit