ASRock Z77 WS manual English

4. Click the Create Team tab.

*The Create Team tab appears only if there are teamable adapters available.

5.Click the Team Name field to enter a team name.

6.Click the Team Type field to select a team type.

7.Assign any available adapter or adapters to the team by selecting the adapter from the Load Balance Members list. There must be at least one adapter selected in the Load Balance Members list.

8.You can assign any other available adapter to be a standby member by selecting it from the Standby Member list.

*There must be at least one Broadcom network adapter assigned to the team. The Large Send Offload (LSO), Checksum Offload (CO), and RSS indicate if the LSO, CO, and/or RSS properties are supported for the team. The LSO, CO, and RSS properties are enabled for a team only when all of the members support and are configured for the feature.

*Adding a network adapter to a team where its driver is disabled may negatively affect the offloading capabilities of the team. This may have an impact on the team’s performance. Therefore, it is recommended that only driver-enabled network adapters be added as members to a team.

49

English

ASRock Z77 WS Motherboard