Specifications†

220VP/220VPW

Continuously-variable Pattern Condenser Boundary Microphone

Specifications

 

Operating Principle

Condenser

Polar Pattern

Continuously-variable

Frequency Response

90Hz -17KHz

Sensitivity

-32dBV (25mV) @ 1 Pa

Impedance

120 ohms

Maximum SPL

120dB, 1% T.H.D., 1KHz

Self Noise

18dBA

Power Requirements

P12, P24, P48, 4mA

Connector

3-pin XLRM-type

Polarity

Positive pressure on diaphragm

corresponds to positive voltage on pin 2 relative to pin 3 at XLR3M-type connector.

Finish

Durable matte-black urethane

 

or white (220VPW)

Dimensions

(See drawing)

Net Weight [Mass]

3.9oz [0.11Kg]

Packaged Weight [Mass]

5.0oz [0.14Kg]

RF Immunity

Meets or exceeds EN55103-2,

RoHS Compliant

E1, E2, E3 and E4

 

†Specifications subject to change without notice.

Included Accessories

...............................2 rubber bushings,

 

hex nut and washer

Architects’ and Engineers’ Specifications

The microphone will be an inconspicuous, continuously- variable polar pattern, button-style, condenser boundary microphone designed for surface installation. The microphone will have a continuously-variable polar pattern. The sensitivity of the microphone will be –32dBV (25mv)

@1Pa. The frequency response will be 90Hz-17KHz. The impedance of the microphone will be 120 ohms. The self- noise will be 24dBA. The maximum SPL will be 120dB.

The microphone will include an integral 80Hz, 12dB/octave high-pass filter to improve intelligibility. The microphone will have a 3-pin XLRM-type connector allowing for bottom exit. The microphone will operate from P12, P24 or P48 standard phantom power consuming 4mA.

The microphone element and electronics will be enclosed in a radio frequency resistant housing meeting or exceeding EN55103-2. The 220VP will be 3-3/8" [85mm] long, 1-1/8" [28mm] in diameter and stands 3/4" [20mm] above boundary. The net weight [mass] will be 3.9oz [0.11Kg]. The packaged weight [mass] will be 5.0oz [0.14Kg]. The 220VP will have durable matte-black urethane or matte-white finish.

The Astatic model 220VP or 220VPW is specified.

Omnidirectional

Cardioid

Figure-of-eight

Two-Year Limited Warranty

Astatic Commercial Audio Products hereby warrants that this product will be free of defects in material and workmanship for a period of two years from the date of purchase. In the unlikely event that a defect occurs Astatic will, at its option, either repair or replace with a new unit of equal or greater value. Retain proof of purchase to validate the purchase date and return it with any warranty claim.

This warranty excludes exterior finish or appearance, damage from abuse, misuse of the product, use contrary to Astatic’s instructions or unauthorized repair. All implied warranties, merchantability, or fitness for a particular purpose is hereby disclaimed and Astatic hereby disclaims liability for incidental, special or consequential damages resulting from the use or unavailability of this product.

This warranty gives you specific legal rights and you may have other rights that vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusions and limitations may not apply to you.

Note: No other warranty, written or oral is authorized by Astatic Commercial Audio Products.

Shipping Instructions

Please call our customer service department at 440-349-4900 for a pre-approved return authorization number.

Carefully repack the unit and return the insured package to: Astatic Commercial Audio Products, 6573 Cochran Road, Building I, Solon, Ohio 44139.

RETURNS WITHOUT A PRE-APPROVED RETURN AUTHORIZATION NUMBER WILL BE REFUSED.

If outside the United States, contact your local dealer or distributor for warranty details.

©2008 Astatic Commercial Audio Products

Part No. 46873-87-00 Jun2008

Astatic Commercial Audio Products 6573 Cochran Rd. Building I Solon, Ohio 44139 U.S.A.

Tel: (440) 349-4900 Fax: (440) 248-4902 Sales: (800) 421-3161 www.astaticinstalled.com

Page 2
Image 2
Astatic 220VP/220VPW, Continuously-variable Pattern Condenser Boundary Microphone, Specifications†, RoHS Compliant